Fabricant de quick connectors à fibre optique

Fast Connector Families: Specs, MOQ and Lead Time

Every fast connector family this fiber optic fast connector manufacturer builds is listed below with MOQ and lead time. Lead time runs from deposit and includes 100% IL/RL testing and packing.

Family	Options	MOQ	Lead time
SC/UPC fast connector	SM, 0.9-3.0 mm and 2×3 mm flat drop, 50-60 mm boots	500 pcs	5-8 days
SC/APC fast connector	Green body, 8-degree internal stub, SM G.657A1	500 pcs	5-8 days
LC fast connector	UPC, SM, for high-density FTTH panels	500 pcs	6-9 days
Waterproof fast connector	IP-rated housing, round cable, outdoor boxes	300 pcs	6-9 days
Hot-melt (fusion type)	For crews who prefer a fusion splice head with quick housing	500 pcs	6-9 days
Multimode fast connector	OM2/OM3, for indoor short-run terminations	500 pcs	6-9 days

MOQ and lead-time figures are standard production windows; Chinese New Year peaks can add 5-7 days. Fixed rollout dates are confirmed in writing on the proforma invoice.

What buyers order most from this shelf

• SC/APC green, G.657A1: the FTTH drop standard - angled polish for the ONT side, fiber-friendly bend radius for tight home runs.
• SC/UPC for 2×3 mm flat drop: the classic last-meter termination on flat drop cable.
• Waterproof SC/UPC: outdoor distribution boxes and pole-mounted terminals.
• Hot-melt SC: for crews mixing fusion and field methods across one project.
• LC/UPC fast connector: high-density FTTH panels where SC will not fit.

These five cover most rollout purchase orders. Part codes in the FKSU/FKSA series map to boot length and polish - the grid above holds every current build.

How a Fast Connector Works: The Pre-Polished Stub

The trick lives inside the housing. A short fiber stub, factory-polished to a finished finish, sits permanently in the connector body. Your field fiber cleaves clean, slides into the clamp, and presses against that polished stub. Three outcomes follow:

• No epoxy, no oven: the mechanical clamp holds the fiber - installation needs a stripper, a cleaver and one minute.
• Factory polish quality: the geometry your signal sees was finished on our polish machine, not on a pole.
• Index-matching inside: the stub interface is gel-filled to keep reflection down between the two fiber ends.

That is the whole invention - and why the patent matters to buyers choosing a fiber optic fast connector manufacturer. Cheap copies skip the gel, ship soft clamps and hand you a connector that drifts after one thermal cycle.

The One-Minute Install, Step by Step

A trained installer finishes a termination in about a minute - the working definition of a fiber optic fast connector manufacturer's core product. The full procedure:

1. Strip: strip 3-4 cm of jacket and buffer from the drop cable with the marked gauge on the housing.
2. Clean and cleave: wipe the bare fiber with alcohol, cleave at the marked length - a clean 90-degree cleave is the one skill that decides the result.
3. Insert: slide the fiber into the connector until the stub meets the cleaved end.
4. Clamp: press the clamp lever home; the grip locks the fiber at the set position.
5. Verify: an optical meter or VFL confirms the link - most crews test at the ONT anyway.

Training takes ten minutes. Crews that switched from fusion to fast connectors report three to five times more terminations per day on drop work (draft field figure - confirm with your own pilot).

Five Field Failures and the Habit That Stops Each

Ninety percent of "bad connectors" trace to one of five field habits. Print this for the crew van:

• High insertion loss - a dirty or angled cleave. Clean with alcohol, cleave once, insert without touching the glass.
• Return loss drift - gel contaminated by stripped-buffer debris. Keep the stub capped until the last second.
• Loss that walks with temperature - an over-tightened clamp offsetting the core. Close the lever until it clicks, not harder.
• Intermittent link - a reused clamp on its third or fourth termination. Clamps are consumables; fresh units price for volume.
• Dust in the adapter - an uncapped connector in the van. The same dust caps that ship on our units go back on after every test.

Our instructions card ships in every 500-piece box with these five lines on it. Crews that follow the card see first-pass rates above 98% (draft field figure - verify in your pilot).

Field Termination vs Fusion Splicing vs Factory Cords

Three termination methods, three honest verdicts - a fiber optic fast connector manufacturer that also runs fusion and patch cord lines can say this without selling one method over another:

	Fast connector	Fusion + pigtail	Factory patch cord
Time per end	~1 minute	3-5 minutes with machine warm-up	Plug in - seconds
Typical loss	≤0.5 dB	≤0.1-0.2 dB	≤0.3 dB
Skill and gear	Cleaver only	Splicer, electrode care, training	None
Best for	Drops, repairs, distributed FTTH	Trunks, high-count ODF work	Racks, panels, equipment links
Cost logic	Lowest crew cost per drop	Lowest loss per joint	Lowest labor - zero at install

Most FTTH builds mix all three: cords in the exchange, fusion in the trunk, fast connectors at the drop. We supply all three lines from one factory, so the mix stays on one purchase order.

OEM, ODM and Private-Label Capability

As the OEM fiber optic fast connector manufacturer behind distributor brands, we build to your marking, packaging and kit spec:

• OEM: laser marks on housings, private-label polybags and retail cards - free artwork proofing above 2,000 pieces.
• ODM: custom boot lengths, kit configurations (connector + stripper + wipes in one box), and drop-cable-specific clamp tuning - samples in 10-15 days after drawing approval (draft).
• OBM / JDM: exclusive part codes and stocking programs for distributors under NDA.

OEM projects we shipped (draft references - replace with your approved cases)

• Southeast Asian FTTH rollout, 2024: 60,000 SC/APC fast connectors for a provincial drop program, phased over 5 months against installation targets.
• European ISP retail kit, 2023: retail cards pairing two SC/UPC fast connectors with wipes under a private brand, quarterly call-offs.
• Latin American contractor, 2025: waterproof SC/UPC units for pole-box terminations in a coastal humidity zone.

Regional Notes: How Different Markets Terminate Drops

Twenty-five years of export taught this fiber optic fast connector manufacturer how tastes change by region:

• Asia-Pacific: SC/APC green dominates; drop programs order in five-figure cycles with weekly call-offs.
• Europe: retail kits and UPC types for self-install markets; private-label cards and barcodes matter as much as the spec.
• Middle East & Africa: waterproof housings and dust discipline for outdoor cabinets; APC preferred on CATV-heavy networks.
• Americas: mixed SC/UPC and LC builds for MDU retrofits; armored cords and fast connectors ship together.

Tell us the country and the crew profile. We answer with the mix that already ships there.

Fast connectors finish the drop; the rest of the chain ships from the same plant: flat drop cable, adapters for the boxes, and termination boxes rated for the outdoors.

What Ships in the Box - and What the Crew Adds

Each 500-piece box arrives production-ready:

• Per connector: dust caps on both ends, factory test reading on the bag label.
• Per box: batch number, quantity, manufacture date, and the five-habit instruction card.
• Per order (on request): the batch test file in your template, and a dimensional drawing for your records.

The crew adds a stripper, a cleaver and alcohol wipes. For teams standardizing a van kit, we pack connector boxes together with termination boxes, adapters and drop cable in one container - one B/L, one customs entry, one supplier to call.

Certifications: The Patent and the Papers

Two documents separate this shelf from commodity copies. First, the design: Zhou Liubo, our R&D director, holds a Chinese utility patent on a fiber optic quick connector - the clamp and stub architecture in these products. Second, the compliance: the fast connector family carries CE reports covering LC, SC and FC types for the EU market, and the factory runs under ISO 9001:2015. Copies of both live on the certificate page and join every quote.

Certificate	Relevance to fast connectors
Utility model patent	The quick-connector design itself - inventor Zhou Liubo
CE reports (LC / SC / FC)	Fast connector family sold into the EU
ISO 9001:2015	Quality management for assembly and 100% test
OHSAS 18001:2007	Occupational health and safety management

Optical performance references IEC 61754 interface standards; materials run RoHS-compliant on request. The patent number and CE scope print into tender documents on request.

Why the patent matters to a procurement file: it proves the design was engineered here, revised here, and defended here. A patented product comes with named engineering ownership - when a clamp revision or a gel spec changes, the change has an author, a date and a reason. That is the difference between sourcing a product and sourcing a promise.

Factory Strength: The Same Roof as the Cable and Cords

Fast connectors assemble in the Yiwu compound alongside our cable extrusion and patch cord benches - 25 years under founder LING LI, since December 2000:

• Stub production: pre-polished stubs come off our own polish cells, so internal geometry never depends on a outside vendor.
• Assembly: dedicated fast-connector cell for clamp, gel-fill and housing work, batch-coded per production run.
• Test: 100% IL/RL on calibrated benches; Grace Xu, Quality Director, signs every release.
• R&D: Zhou Liubo, Director of R&D and patent holder, owns the design and its revisions - clamp tuning for new drop-cable styles starts here.
• Export: Peter Lin, Head of Export Sales - one contact for quotes, rollout scheduling and documents. Video audits run any business day - see the factory gallery.

Company quick facts
Founded	December 2000, Yiwu City, Zhejiang, China
Founder	LING LI, Founder & General Manager
Focus	Fast connectors, patch cords, pigtails, cable, adapters, splitters, ODFs
Export markets	40+ countries across Asia, the Middle East, Africa, Europe and the Americas
Response time	Quotes within 24 hours on business days

The Cost Math: Fast Connector vs Fusion, Per Drop

Procurement compares piece prices; operations should compare cost per working drop. An illustrative model (draft numbers - run your own rates):

Line item	Fast connector	Fusion + pigtail
Parts per drop	1 connector	1 pigtail + splice protector
Crew time per drop	~1 minute + travel	3-5 minutes + splicer setup
Drops per crew-day (draft)	35-45	12-18
Crew cost per drop	Lower - fewer crew-days per rollout	Higher - time dominates the math
Loss budget	≤0.5 dB - fine for drops	≤0.2 dB - reserve for trunk

When a 10,000-drop rollout buys from this fiber optic fast connector manufacturer, the crew-day savings usually outweigh the connector piece-price several times over. That is the arithmetic behind the switch - and why rollout programs order in five-figure cycles.

Why Buyers Pick HENGXANG Over Other Suppliers

Fast connectors look identical in product photos. The differences show up in your installers' hands and in the acceptance test:

Factor	HENGXANG	Typical trading company
Design origin	Patented in-house design, R&D on staff	Unbranded copies, no design control
Stub quality	Polished in-house on the same cells as our cords	Outsourced stubs, unknown polish
Testing	100% IL/RL, reading on each bag	Batch sampling
MOQ	300-500 pcs by family; trial packs welcome	5,000 pcs minimums
Quote speed	Within 24 hours on business days	Days
Consistency	Same clamp force and gel spec across batches	Varies with the source factory

And one commitment crews appreciate: every batch change is announced - if the boot mold or gel lot changes, the label says so, because installers calibrate their feel to the last batch.

How We Work With You: From Rollout Plan to Loaded Pallets

Six steps, all written down:

• Step 1 - RFQ: send the type mix and rollout schedule - SC or LC, UPC or APC, cable sizes, monthly quantities. WhatsApp +86 134 3434 9304 or the contact form.
• Step 2 - Quote: unit prices, MOQ, lead time and packing plan within 24 hours on business days.
• Step 3 - Samples: sample packs ship in 3-5 days for crew trials - put them on a real drop, not a desk.
• Step 4 - Production: photos at stub polish, assembly and test stages while your order runs.
• Step 5 - Inspection: 100% IL/RL bench plus third-party inspection on request.
• Step 6 - Shipment: EXW, FOB Ningbo/Shanghai or CIF; rollout orders can phase weekly.

Cold Clamp or Hot Melt: Two Field Philosophies

The fast connector world splits into two builds, and crews argue about them like politics. The honest comparison:

	Cold mechanical clamp	Hot-melt (fusion head) type
How it holds fiber	Mechanical clamp against a pre-polished stub	Fusion-spliced pigtail head in a quick housing
Tools on site	Stripper, cleaver, wipes	Stripper, cleaver, fusion splicer, power
Install time	About 1 minute	3-5 minutes with splicer warm-up
Typical loss	≤0.5 dB	≤0.2-0.3 dB
Best crew	High-volume drop teams	Jointers already carrying a splicer

We build both. Crews that own splicers take the hot-melt head for its lower loss; high-volume drop programs take the cold clamp for its speed. Ordering both from one fiber optic fast connector manufacturer keeps the boot colors and part codes consistent across the same project.

Worked Example: A 10,000-Piece Drop Program

Illustrative figures - your quote states yours. An ISP runs 10,000 home drops and orders 10,000 SC/APC fast connectors for G.657A1 drop cable:

Step	Detail
Day 0	Rollout quantity received; quote issued next morning with call-off plan
Day 1-2	Sample pack airfreighted; crew terminates 20 drops in training
Day 3-8	Production run; stub polish and assembly photos shared at each stage
Day 8-9	100% IL/RL on all 10,000 pieces; batch file exported to the buyer's template
Day 10	Pack: 20 cartons of 500, each bag labeled with type and test reading
Day 11	Trucked to Ningbo, FOB; first call-off ships, balance held for weekly release

Eleven days to first shipment, weekly supply after - the pace an FTTH program needs from its fiber optic fast connector manufacturer.

Terminate the Drop, Then Run the Whole Shelf

The drop is one link in the chain. The same fiber optic fast connector manufacturer ships the flat drop cable the fast connector clamps onto, the adapters at the box, termination boxes and splice closures for the field, splitters for the split point, and ODFs for the exchange. Standard epoxy-style connectors and ready-made patch cords sit on the same shelf. Planning the exchange side? Start with our ODF planning guide. One purchase order, one freight plan, one warranty conversation.

Crew Training and Sample Program

Switching a crew from fusion to field termination is a training question, not a talent question. The sample program runs like this:

• Sample pack: 10-20 connectors of your type mix plus the instruction card, airfreighted in 3-5 days.
• Pilot drop: the crew terminates 20-30 real drops and logs first-pass rates with an optical meter.
• Review call: we join by video, read the numbers together, and adjust type mix or cable prep if the pilot says so.
• Rollout supply: the production plan phases against your installation calendar - weekly or monthly call-offs at locked prices.

Training materials - step cards, cleave-length gauges and a short video - ship with the samples in English or with your translated text. A fiber optic fast connector manufacturer that has run this pilot with dozens of crews can tell you the two habits that matter; the rest of the meeting is scheduling.

Specification Quick Reference

The numbers a purchasing sheet needs, in one block (typical values - per-type datasheets carry the binding windows):

Parameter	SC/UPC	SC/APC
Insertion loss	≤0.5 dB typical	≤0.5 dB typical
Return loss	≥45 dB	≥55 dB
Fiber grades	G.652D / G.657A1 / A2	G.657A1 / A2
Cable range	0.9 / 2.0 / 3.0 mm, 2×3 mm flat	0.9 / 2.0 / 3.0 mm, 2×3 mm flat
Re-termination cycles	2-3 (draft)	2-3 (draft)
Boot length	50 / 55 / 60 mm	55 / 60 mm

A fiber optic fast connector manufacturer that states its windows in writing - and prints per-piece test readings - removes the acceptance argument before the container lands.

Frequently Asked Questions

Quick connectors : specs, MOQ et délais

Trois chiffres décident l’essentiel des commandes : ce que nous fabriquons, combien peu il faut commander et à quelle vitesse livrer. Délais à partir de l’acompte, tests 100% inclus.

Famille	Options	MOQ	Délai
SC/UPC fast connector	SM, 0,9-3,0 mm et drop 2×3 mm	500 pcs	5-8 j
SC/APC fast connector	Vert, stub APC, G.657A1	500 pcs	5-8 j
LC fast connector	UPC, panneaux denses	500 pcs	6-9 j
Version étanche	Boîtier IP, câble rond	300 pcs	6-9 j

MOQ et délais standards ; pics du Nouvel An chinois +5-7 jours. Dates fixes confirmées par écrit sur la facture proforma.

Pourquoi choisir HENGXANG

• Design breveté, R&D interne - revisions documentées.
• Stubs polis sur nos propres cellules, même qualité que nos cordons.
• Test 100% IL/RL, mesure sur chaque sachet.
• MOQ 500 pcs, packs d’essai pour les équipes.
• Compatible G.652D et G.657A1/A2.

Questions fréquentes